For almost every roof in Beaconsfield, soft washing combined with removing heavy moss by hand is far safer than pressure washing. High pressure strips the surface of concrete tiles, can crack clay tiles and slate, and drives water under the tiles and into the roof space. It looks impressive for a week, then the moss returns faster because the surface is now rougher. Pressure washing has its place, but that place is usually the driveway, not the roof.
What pressure washing does to a roof
A pressure washer cleans by force. On a hard, dense surface such as block paving that is fine. On a roof it causes problems that do not show up until later.
- It strips concrete tiles. Concrete tiles have a surface layer that sheds water. High pressure blasts it away, leaving exposed aggregate that is rougher and more porous, which gives moss even more to grip.
- It cracks older tiles and slate. Clay tiles and natural slate become brittle with age, and the nibs and fixings that hold them in place can snap or loosen.
- It drives water where it should not go. Tiles are designed to shed rain falling from above, not water fired at them from below. High pressure pushes water under the laps and into the roof space and insulation.
- It spreads debris everywhere. Moss and slurry end up across windows, walls, cars and the neighbour’s garden.
What soft washing is
Soft washing uses a biocide solution applied at low pressure, closer to a garden sprayer than a jet wash. The biocide kills moss, lichen and algae at the root, including spores you cannot see.
The important thing to understand is that soft washing keeps working after we have left. Dead growth loosens and weathers off over the following weeks as the rain does its work, and lichen in particular takes time to fade. A roof often looks better a month after a soft wash than it did on the day.
Where hand moss removal comes in
Biocide on its own struggles to penetrate thick cushions of moss. So on a heavily mossed roof we remove the bulk by hand first, using scrapers and working down the roof, then soft wash what remains. That combination gets a clean finish without putting the tiles under any pressure. It is also why the gutters are always cleared at the end of a roof clean.
When pressure washing is the right tool
We are not against pressure washing. We use it where the surface can genuinely take it, such as block paving, concrete driveways and some patios. The point is to match the method to the surface, which is the whole reason we carry more than one. Our driveway cleaning and patio cleaning pages explain how we decide.
Questions to ask any roof cleaner in Beaconsfield
Whoever you book, these questions will tell you a lot.
- Which method will you use on my roof, and why that one?
- Will you be walking on the roof, and how will you protect the tiles?
- What happens to the moss and debris, and will you clear the gutters afterwards?
- What insurance do you carry? We hold GBP 10 million public liability cover.
- Can you show me the roof before and after? We fly every roof by drone at both stages.
If you want a roof cleaned properly rather than blasted, see how we clean a roof, read our guide to roof cleaning in Beaconsfield, or book a free drone survey.